How to Fix ‘BlinitializeLibrary failed 0xc00000bb’ Error on Windows in 2022

If you are having trouble getting your library to initialize, here are a few troubleshooting tips that might help. First, make sure that you have the correct version of the library installed. If you are using a shared library, make sure that the correct files are included in your project. Also, be sure to check the compiler options and include paths for the library. Finally, make sure that you have linked correctly against the library file. If all else fails, try restarting your computer.”

When encountering the error message “bi initialize library failed” when opening BI tools, don’t panic. This guide will help you troubleshoot and fix the issue. Most likely, the problem is caused by an incorrect file path or missing DLLs. With a few simple steps, you can have BI tools up and running again in no time.

User reports of a sudden boot failure are coming in from all around the world. They report that when attempting to start their computers, they encounter an error message stating “blinitializelibrary failed 0xc00000bb” and nothing will load past this point; even trying different things like restarting or pressing control +alt+del does not help fix the problem
Booting devices with these kinds of problems is frustrating at best because there doesn’t seem anywhere for them go once you get stuck on startup without being able resolve whatever issue caused your computer’s motherboard core values (or bios) Reset themselves unexpectedly during use

The issue doesn’t seem to be specific to a certain Windows version or manufacturer since it’s reported to occur on Windows 7, Windows 8.1 and Windows 10 with various different PC configurations.

Read more : Tenorshare 4DDiG Crack Free Download

What is causing the Blinitializelibrary failed 0xc00000bb error?

We investigated this particular issue thoroughly by investigating various user reports and the repair strategies that are the most successful in resolving this error message. As it turns out, there are several different potential culprits that might be responsible for the apparition of this issue:

If you’re currently struggling to resolve the very same error message, this article will provide you with several troubleshooting guides that should fix the problem for you. Down below, you’ll find a collection of potential fixes that other users in a similar situation have successfully used to resolve the “blinitializelibrary failed 0xc00000bb” error.

If you want to remain as efficient as possible, we encourage you to follow the methods below in the order that they are presented until you find that resolve the issue according to the culprit that’s causing the issue. We ordered them by efficiency and difficulty.

Method 1: Disabling Secure Boot

As it turns out, secure boot is often times responsible for this particular issue. This is a feature introduced with Windows 8 that also made it’s a way to Windows 10. Its role is to prevent malware and rootkits from running during the initial boot sequence.

During a Secure Boot sequence, your computer will only boot with the software trusted by OEMs (Original Equipment Manufacturers. But if you’re using cloned SSDs or modified hardware, it can conflict with the booting sequence under certain PC configurations and trigger the “blinitializelibrary failed 0xc00000bb” error. The secure boot feature might regard the differences as a security breach and prevent the computer from booting up normally.

Several affected users have reported that they managed to resolve this issue by disabling secure boot from the BIOS menu of their computer. If you’re encountering the very same issue and you suspect that secure boot might be responsible for this issue, follow the instructions down below to disable the security feature from BIOS settings:

1. As soon as your computer starts to boot up, start pressing the Setup key during the initial startup screen. The setup key depends on your motherboard manufacturer, but it should be visible on the initial screen.
   

   

   Note: If you can’t see the Setup key (BIOS setup) on the initial screen, search online for “setup key + *motherboard manufacturer*”

2. When you’re inside your BIOS settings, make your way to the Security tab and look for a feature called Secure Boot. Once you see it, set it to Disabled.
   

   

   Note: Keep in mind that the BIOS menu and the exact location of the secure boot feature will be different across different manufacturers. Expect to find the Secure Boot option under System Configuration, Boot or Authentication – depending on your motherboard manufacturer.

3. Once you manage to disable secure boot, save your configuration and exit your BIOS settings. Your computer will then restart.
4. At the next boot sequence, see if your computer is now able to complete the process successfully without encountering the “blinitializelibrary failed 0xc00000bb” error.

If the same issue is still occurring, move down to the next method below.

Method 2: Fixing the booting sequence

In most cases, the blinitializelibrary failed 0xc00000bb” error will occur due to an underlying booting problem. In cases like this, the most effective way of resolving the issue is to fix the entire booting sequence by using naponewsonline.org – a built-in Windows utility capable of fixing the master boot record, the boot sequence and the boot configuration data. Any of these items can be responsible for the error that you’re currently dealing with.

IMPORTANT: In order to start the procedure of repairing the booting sequence, you need a valid Windows Installation media for your operating system. If you don’t have at the ready, you can create one by following the steps outlined in these articles:

• Creating an Installation Media for Windows 7
• Creating an Installation Media for Windows 10

Note: If you don’t have the installation media and have no means of obtaining it, you can also force the Startup recovery menu to appear by forcing 3 consecutive startup interruptions (turning off the computer during the booting sequence).

Once you’re ready to go, here’s a quick guide on running the naponewsonline.org utility:

1. Start by inserting the installation media before the booting sequence begin. Then, press any key when prompted to boot from it. Once you arrive at the initial Windows installation window, click on Repair your computer – bottom right or left corner, depending on your Windows version.
   

   

2. You’ll be taken directly to the Advanced Options menu. Once you get there, click on Troubleshoot, then select Command Prompt from the list of available items.

Choosing Command Prompt from Advanced Options

1. Once the Command Prompt window is opened, type the following command inside and press Enter after each command to rebuild the entire Boot Configuration data:naponewsonline.org naponewsonline.org /fixmbr naponewsonline.org /fixboot naponewsonline.org /scanos naponewsonline.org /rebuildbcd
2. Once all commands have been successfully completed, all your boot configuration data should be repaired. Test to see if you managed to resolve the issue by restarting your computer and seeing the booting sequence is complete.

If you’re still encountering the same “blinitializelibrary failed 0xc00000bb” error, move down to the next method below.

Method 3: Tweaking Memory Management keys in Safe Mode

As it turns out, this particular issue can also occur in instances where your BIOS ends up forgetting which SSD/HDD is the primary drive. This scenario was discovered by some users that checked the boot order whenever this issue was occurring only to discover that the Windows drive is no longer the first bootable drive.

If this scenario is applicable, you should be able to resolve the issue by deploying a registry tweak to prevent your computer from clearing the Page File at every shutdown. This procedure has been confirmed to be successful on both Windows 7 and Windows 8.

But in order to get as far as to be able to use the Registry Editor in order to resolve the issue, you need to boot your computer up in Safe Mode. Here’s a quick guide on booting your computer up in Safe mode and making the memory management tweak:

1. Power your computer on and start pressing the F8 key repeatedly as soon as you see the initial screen to open up the Advanced Boot Options.
2. Once you’re inside the Advanced Boot Options menu, use the arrow keys or press the corresponding key (F4) to select Safe Mode.
   

   

3. Wait until the booting sequence is completed. Once the startup procedure is complete, press Windows key + R to open up a Run dialog box. Next, type “regedit” inside the text box and press Enter to open up Registry Editor.
   

   Note: If you’re prompted by the UAC (User Account Control), click Yes to grant administrative privileges.

4. Once you’re inside Registry editor, use the left-hand side to navigate to the following location or paste it directly in the navigation bar and press Enter:ComputerHKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory Management
5. When you arrive at the correct location, move down to the right-hand pane and double-click on ClearPageFileATShudown. Inside the Edit DWORD (32-bit) value window of ClearPageFileAtShutdown, set the Base to Hexadecimal and the Value data to 1 and click Ok to save the changes.
   

6. Once this change has been made, restart your computer and see if the normal startup sequence is successful at the next attempt. If it is, follow steps 3 to 5 once again, but this time set the ClearPageFileAtShutdown back to 0 and save the changes.

If this method didn’t fix the blinitializelibrary failed 0xc00000bb” error or this method wasn’t applicable to your particular scenario, move down to the next method below.

Method 4: Enabling Above 4G Decoding

If you’re using your PC rig for mining purposes and are using 2 or more GPU cards, chances are you’re encountering the ‘bl initialize library failed 0xc0000bb‘ error because 4G decoding is not enabled on your motherboard BIOS or UEFI settings.

Several affected users who were also mining cryptocurrencies have reported that the issue was resolved after they enabled 4G decoding or Above 4G Decoding. Of course, the exact location of this option is highly dependable on your motherboard manufacturer, but typically you can find it inside the Peripherals tab.

NOTE: On EVGA motherboards, this feature is called EVGA Support instead of 4G support.

If this method wasn’t applicable to your particular scenario, move down to the next method below.

Method 5: Performing a repair install

As several affected users have reported, this issue can also occur due to a failing HDD or SSD drive. If none of the methods above have helped you to resolve the issue, it’s likely that you’re actually dealing with a storage issue.

Since you can’t really boot in order to make the necessary verifications to confirm that you’re actually dealing with a failing drive, the only way to do it is to perform a repair install. This procedure will replace any Windows component, eliminating the possibility of a system file corruption. If you’re still encountering this issue even after ensuring that your Windows files aren’t corrupted, you can safely confirm that your SSD is failing.

FAQs

How do I fix bi initialize library failed?