If you’re looking for an easy way to maximize your cabinet’s storage space, installing a lazy susan can be a game-changer. Lazy susans are rotating trays that allow you to access items in your cabinet without having to reach around or remove other items. However, installing them can be tricky, especially if you’ve never done it before. In this article, we’ll guide you through the process of installing lazy susan hardware step-by-step.

Preparation

Before you begin installing your lazy susan hardware, you’ll need to gather some tools and materials. Here’s what you’ll need:

Tools

• Drill
• Screwdriver
• Pencil
• Measuring tape
• Level

Materials

• Lazy susan hardware kit
• Wood screws
• Wood glue (optional)

Once you have your tools and materials ready, you’ll need to measure your cabinet and the hardware to ensure a proper fit.

First, measure the inside of your cabinet to determine the diameter of the lazy susan hardware. Then, measure the height of the cabinet and the distance from the cabinet’s back wall to the center point of the cabinet. Write down these measurements, and use them to determine where to install the hardware in the next section.

Installing the Base

The base is the foundation of your lazy susan hardware, and it’s where the turntable will rotate. Here’s how to install it:

1. Attach the base plate to the bottom of the cabinet with wood screws. Make sure the plate is level and centered based on the measurements you took earlier.
2. Secure the base to the cabinet with wood screws. Be sure to attach it to both the cabinet’s back wall and the base plate for added stability.

Once you’ve installed the base, you’re ready to move on to the turntable installation.

Installing the Turntable

The turntable is the rotating tray that sits on top of the base and allows you to access items in your cabinet easily. Here’s how to install it:

1. Attach the turntable to the base by aligning the holes on the turntable with the holes on the base plate. Use the screws provided in your lazy susan hardware kit to secure the turntable to the base. Be sure to tighten the screws securely to prevent wobbling or misalignment.
2. Once you’ve attached the turntable, check for smooth rotation. Give the turntable a spin to ensure that it rotates freely and without any resistance. If you notice any issues, adjust the screws until the rotation is smooth.

Installing the Top Plate

The top plate is the final piece of the lazy susan hardware puzzle, and it’s what holds your items in place on the turntable. Here’s how to install it:

1. Attach the top plate to the turntable by aligning the holes on the top plate with the holes on the turntable. Use the screws provided in your lazy susan hardware kit to secure the top plate to the turntable. Be sure to tighten the screws securely to prevent wobbling or misalignment.
2. Once you’ve attached the top plate, ensure that it’s stable and balanced. Place some items on the top plate and give the turntable a few spins to check for any wobbling or instability. If you notice any issues, adjust the screws until the top plate is balanced and stable.

Congratulations! You’ve successfully installed your lazy susan hardware. Now, all that’s left to do is adjust the height and alignment and test the lazy susan for functionality. We’ll cover these final steps in the next section.

Installing the Top Plate

The top plate is the final piece of the lazy susan hardware, and it’s where you’ll place your items. Here’s how to install it:

1. Attach the top plate to the turntable with screws or clips, depending on your hardware kit.
2. Make sure the top plate is centered on the turntable and level. You can use a level to ensure it’s balanced.
3. If your lazy susan is a two-tier design, repeat the process for the second top plate.

Once the top plate is installed, you’re almost done. All that’s left is to adjust the height and alignment of the hardware and test it for functionality.

Final Steps

The last steps in installing your lazy susan hardware are to adjust the height and alignment and test it for functionality. Here’s what to do:

1. Adjust the height of the hardware by loosening the screws that attach the base plate to the cabinet and moving the hardware up or down as needed. Tighten the screws once you’ve achieved the desired height.
2. Check the alignment of the hardware by ensuring that the turntable is level and centered. You can use a level to check this.
3. Test the lazy susan for functionality by placing items on the top plate and rotating it. Make sure it rotates smoothly and doesn’t wobble or tip over.

Once you’ve completed these final steps, you’re done! Your newly installed lazy susan hardware should provide easy access to your items and maximize your cabinet’s storage space. Enjoy your newly organized cabinets!