If you’re looking to give your vehicle a sleek, custom look and protect it from road debris, installing slip on rocker panels is an excellent option. Slip on rocker panels not only enhance the appearance of your vehicle but also provide a layer of protection against rust and corrosion. In this step-by-step guide, we’ll show you how to install slip on rocker panels on your vehicle.

Gather Required Materials

Before starting the installation process, it’s essential to gather all the necessary materials to ensure a smooth and efficient installation. These materials include:

• Slip on rocker panels
• Adhesive
• Cleaning solution
• Microfiber cloth
• Sandpaper
• Measuring tape
• Jigsaw or hacksaw

It’s crucial to have all the materials on hand before starting the installation process to avoid any delays or interruptions. In addition, make sure you have the correct size slip on rocker panels for your vehicle, as this can vary depending on the make and model.

Once you have all the required materials, it’s time to prepare the vehicle for the installation process.

Prepare the Vehicle

Before installing slip on rocker panels, it’s essential to prepare the vehicle’s rocker panels properly. This involves cleaning the rocker panels and removing any old rocker panels (if applicable).

To clean the rocker panels, use a cleaning solution and a microfiber cloth to remove any grime, dirt, or debris. Next, use sandpaper to roughen up the surface of the rocker panels to ensure the adhesive sticks properly.

If your vehicle already has rocker panels installed, you’ll need to remove them before installing the slip on rocker panels. Use a jigsaw or hacksaw to cut the old rocker panels, making sure to wear gloves and eye protection. Once the old rocker panels are removed, proceed with the installation process.

Prepare the Vehicle (Continued)

After cleaning and preparing the rocker panels, it’s essential to ensure the vehicle is on a level surface before proceeding with the installation process. This will ensure that the slip on rocker panels are installed evenly and correctly.

To ensure the vehicle is level, park it on a flat surface and use a leveling tool to confirm that the vehicle is even. Once you’ve confirmed that the vehicle is level, proceed with the installation process.

Install Slip On Rocker Panels

Now that you’ve prepared the vehicle, it’s time to install the slip on rocker panels. Follow these step-by-step instructions to ensure a proper installation:

1. Measure the length of the rocker panels to ensure the slip on rocker panels fit correctly. Cut the slip on rocker panels to the correct length using a saw.

2. Apply adhesive to the back of the slip on rocker panels, ensuring that the adhesive is evenly spread across the surface.

3. Carefully place the slip on rocker panels onto the rocker panels of your vehicle, ensuring that they are aligned correctly and evenly.

4. Apply pressure to the slip on rocker panels, ensuring that they are firmly in place. Use a rubber mallet or block of wood to apply pressure evenly across the surface of the slip on rocker panels.

5. Allow the adhesive to set for the recommended time before driving your vehicle. This will ensure that the slip on rocker panels are securely in place.

Tips to Ensure Proper Installation

To ensure a proper installation, here are some additional tips to keep in mind:

• Clean the rocker panels thoroughly before installation to ensure the adhesive sticks properly.
• Use a leveling tool to ensure the vehicle is level before installing slip on rocker panels.
• Be sure to measure and cut slip on rocker panels to fit your vehicle correctly.
• Apply pressure evenly across the surface of the slip on rocker panels to ensure a secure fit.
• Allow the adhesive to set for the recommended time before driving your vehicle.

By following these tips and step-by-step instructions, you can ensure a proper installation of slip on rocker panels on your vehicle.

Finishing Touches

After installing the slip on rocker panels, it’s essential to check for any loose areas. Make sure to walk around the vehicle and inspect the rocker panels to ensure they are properly secured. If you notice any loose areas, use adhesive to secure them.

Next, clean up any excess materials, such as adhesive or debris, that may have accumulated during the installation process. Use a microfiber cloth and cleaning solution to wipe down the rocker panels and ensure they look clean and polished.

Finally, check for proper alignment of the slip on rocker panels. The rocker panels should be aligned with the contours of the vehicle and sit flush against the surface. If the rocker panels appear misaligned, use a measuring tape to adjust them accordingly.

Conclusion

In conclusion, installing slip on rocker panels is an excellent option for those looking to enhance the appearance of their vehicle and protect it from road debris. Slip on rocker panels are easy to install and provide a layer of protection against rust and corrosion.

To recap the installation process, start by gathering all the necessary materials, preparing the vehicle by cleaning and roughening up the surface of the rocker panels, and then installing the slip on rocker panels. Once the rocker panels are installed, check for any loose areas, clean up any excess materials, and ensure proper alignment.

By following this step-by-step guide, you can easily install slip on rocker panels and give your vehicle a custom look while protecting it from the elements.