Are you tired of your bathroom being cluttered with toilet paper rolls? Installing a toilet paper holder is the perfect solution. Not only does it provide a designated spot for your toilet paper, but it also adds a touch of elegance to your bathroom.
In this article, we will guide you through the process of installing a toilet paper holder. We will cover everything from gathering tools and materials to final touches. So let’s get started!
Gather Tools and Materials
Before you start the installation process, it’s essential to gather all the necessary tools and materials. Here’s a list of what you’ll need:
- Toilet paper holder
- Mounting bracket
- Screws
- Drill
- Screwdriver
- Pencil
- Level
- Measuring tape
Each of these tools and materials plays a crucial role in the installation process. The toilet paper holder is the main component that will hold the toilet paper roll. The mounting bracket is what you will attach to the wall to hold the holder. The screws, drill, and screwdriver will be used to secure the mounting bracket to the wall. The pencil, level, and measuring tape are used to ensure that everything is accurately placed and level.
It’s important to note that the tools and materials needed may vary depending on the type of toilet paper holder you have. So, before you start, confirm the necessary tools and materials for your specific toilet paper holder.
Now that you have all the tools and materials, the next step is to determine the placement of the toilet paper holder. There are a few factors to consider when deciding where to install the holder, such as convenience and accessibility.
First, consider the height of the toilet paper holder. You want to ensure that it’s easily accessible to all users, including children and people with disabilities. A standard height is around 26 inches from the floor.
Next, consider the location of the holder. It’s best to place it within arm’s reach of the toilet so that it’s convenient to grab while sitting. Also, ensure that there’s enough clearance around the holder, so it’s easy to replace the toilet paper roll.
Finally, consider the orientation of the holder. Do you want it to be mounted horizontally or vertically? This decision can impact the placement location, so it’s important to decide early on.
Determine Placement (cont’d)
There are several options for placement when it comes to installing a toilet paper holder. You can choose to install it on the wall beside the toilet, on the cabinet next to the toilet, or even on the back of the toilet tank.
If you’re installing the holder on the wall, ensure that it’s not placed directly behind the toilet. This can make it difficult to reach and may even get in the way of sitting. Instead, consider placing it on the wall beside the toilet.
If you’re installing the holder on the cabinet, ensure that it’s not placed too high or too low. You want to ensure that it’s easily accessible for all users.
Finally, if you’re installing the holder on the back of the toilet tank, ensure that it’s securely attached. You don’t want it to become loose or wobbly over time.
Install Mounting Bracket
Now that you’ve determined the placement of the toilet paper holder, the next step is to install the mounting bracket. Follow these steps:
- Using a pencil, mark the location where you want to install the mounting bracket. Ensure that it’s level and at the correct height.
- Use a drill to create pilot holes where you marked the location. The size of the drill bit will depend on the size of the screws provided with the mounting bracket.
- Place the mounting bracket over the pilot holes and insert the screws into the holes.
- Use a screwdriver to tighten the screws until the bracket is secure.
- Double-check that the bracket is level and secure.
Tips for ensuring the bracket is level and secure:
- Use a level to ensure that the bracket is straight and level.
- If you’re installing the bracket on drywall, use wall anchors to ensure that it’s secure.
- Ensure that the screws are fully tightened, but be careful not to over-tighten them, as this can cause damage to the wall or bracket.
With the mounting bracket securely installed, you can now move on to attaching the toilet paper holder.
Attach Toilet Paper Holder
With the mounting bracket securely attached to the wall, it’s time to attach the toilet paper holder. Here are the steps:
-
Start by placing the toilet paper holder onto the mounting bracket.
-
If your holder has a set screw, insert it into the hole on the bottom of the holder and tighten it with a screwdriver. This will secure the holder to the bracket.
-
If your holder doesn’t have a set screw, it may come with a spring-loaded spindle. Insert the spindle into the holder and press it into place.
-
Finally, test the holder by pulling on the toilet paper. Make sure it doesn’t come loose and that it’s level. Adjust as necessary.
Final Touches
Before you declare the installation complete, there are a few final touches to consider.
-
Double-check the installation to ensure that everything is secure and level.
-
If you made any holes in the wall during the installation process, fill them with spackle and let them dry. Then, sand them smooth and touch up the paint if necessary.
-
Clean up any mess made during installation, such as debris or dust.
By following these final touches, you can ensure that your bathroom looks neat and tidy while enjoying your newly installed toilet paper holder.
Conclusion
Installing a toilet paper holder is a simple and cost-effective way to organize your bathroom and add a touch of elegance. By following the steps outlined in this guide, you can easily install a toilet paper holder in your bathroom. Remember to gather all the necessary tools and materials, determine the placement, install the mounting bracket, attach the toilet paper holder, and make final touches.
With a properly installed toilet paper holder, you’ll never have to worry about a messy bathroom again. So go ahead and upgrade your bathroom today!
