Are you tired of rainwater dripping into your car when the windows are down? Installing rain guards is a simple and effective solution to this problem. Weathertech rain guards are a popular choice among car owners due to their durability and ease of installation. In this article, we will guide you through the step-by-step process of installing Weathertech rain guards to keep your car dry and comfortable.

Gather the Necessary Tools and Materials

Before you start the installation process, you must gather the necessary tools and materials to ensure a smooth and successful installation. Here is a list of the items you will need:

Tools

• Alcohol wipes
• Masking tape
• Scissors
• Adhesion promoter
• Hairdryer or heat gun

Materials

• Weathertech rain guards

Having the right tools is crucial to ensure that the installation process goes smoothly. Alcohol wipes are essential to clean the window area thoroughly before installation. Masking tape is used to mark the placement of the rain guards. Scissors are needed to trim the rain guards to fit the size of your car’s windows. Adhesion promoter is used to ensure that the rain guards adhere correctly to the window area. Lastly, the hairdryer or heat gun is used to activate the adhesive and help the rain guards stick better.

Ensure that you have all the necessary tools and materials before starting the installation process. It will save you time and prevent any inconvenience during the installation process. In the next section, we will discuss the preparation process before installing the Weathertech rain guards.

Preparation

Before installing the Weathertech rain guards, it is essential to prepare the window area thoroughly. Here are the steps you need to follow:

1. Clean the window area with alcohol wipes: Use an alcohol wipe to clean the window area thoroughly. Make sure there is no dust or debris on the window area.

2. Identify the correct placement of the rain guards: Carefully read the instructions provided by Weathertech to identify the correct placement of the rain guards. Use masking tape to mark the placement of the rain guards.

3. Use adhesion promoter: Apply the adhesion promoter to the window area where the rain guards will be installed. The adhesion promoter helps the rain guards adhere better to the window area.

Following these steps will ensure that the installation process goes smoothly. In the next section, we will discuss the installation process of the Weathertech rain guards.

Installation

Now that you have prepared the window area, it’s time to install the Weathertech rain guards. Follow these simple steps to install the rain guards:

1. Peel off the adhesive backing from the rain guards: Carefully peel off the adhesive backing from the rain guards. Be careful not to touch the adhesive with your fingers.

2. Carefully align the rain guards with the masking tape: Align the rain guards with the masking tape you placed in the previous step. Ensure that the rain guards are correctly aligned with the window area.

3. Firmly press the rain guards into place: Once the rain guards are correctly aligned, firmly press them into place. Use your fingers to apply pressure evenly to ensure that the rain guards stick well to the window area.

4. Repeat for all windows: Repeat the above steps for all the windows where you want to install the Weathertech rain guards.

It’s essential to follow these steps carefully to ensure that the rain guards are correctly installed and provide the necessary protection from rainwater. In the next section, we will discuss what you should do after the installation process is complete.

Post-Installation

After installing the Weathertech rain guards, it’s essential to follow these post-installation steps:

1. Inspect the rain guards for proper installation: Inspect the rain guards to ensure that they are correctly installed and aligned. Check if there are any gaps or loose areas where water can enter.

2. Clean any excess adhesive: Remove any excess adhesive that may have oozed out during the installation process. Use a clean cloth or alcohol wipe to clean the area.

3. Allow the adhesive to cure for the recommended time period: It’s essential to allow the adhesive to cure for the recommended time period before using the car. Follow the instructions provided by Weathertech to know the recommended curing time.

Following these post-installation steps will ensure that the Weathertech rain guards provide long-lasting protection to your car. In the next section, we will conclude the article by summarizing the steps for installing Weathertech rain guards and highlighting their benefits.

Post-Installation

After installing the Weathertech rain guards, it is crucial to inspect them to ensure they are correctly installed. Here are the steps you need to follow:

1. Inspect the rain guards for proper installation: Check if the rain guards are correctly placed and aligned with the window area. Ensure that there are no gaps or bubbles between the rain guards and the window.

2. Clean any excess adhesive: Use a clean cloth to wipe away any excess adhesive that may have squeezed out during installation.

3. Allow the adhesive to cure for the recommended time period: It is essential to let the adhesive cure for at least 24 hours before using your car. This will ensure a strong bond between the rain guards and the window area.

Following these steps will ensure that your Weathertech rain guards are correctly installed and will provide long-lasting protection to your car.

Conclusion

Installing Weathertech rain guards is a cost-effective solution to keep your car dry and comfortable during rainy weather. Here is a recap of the steps you need to follow:

1. Gather the necessary tools and materials.
2. Clean the window area with alcohol wipes.
3. Identify the correct placement of the rain guards and use masking tape to mark the placement.
4. Apply adhesion promoter to the window area.
5. Peel off the adhesive backing from the rain guards and align them with the window area.
6. Inspect the rain guards for proper installation, clean any excess adhesive, and allow the adhesive to cure for at least 24 hours.

By following these simple steps, you can install Weathertech rain guards on your car and enjoy their benefits. Rain guards not only keep rainwater out of your car but also prevent dust, debris, and insects from entering. We encourage you to try installing rain guards on your car to experience their benefits for yourself.