May 22, 2022

Windows Could Not Update The Computer’s Boot Configuration Windows 10

Video Windows could not update the computer’s boot configuration windows 10

The Windows 10 setup error “Windows could not update the computer’s boot configuration. Installation cannot proceed.” commonly appears in computers that supports UEFI and have the Secure Boot enabled. To resolve this problem, you have two options: to disable the ‘secure boot’ and to start the installation from a Legacy USB boot device or to create the boot configuration files manually.

This tutorial contains two methods to resolve the Windows 10 installation error “Windows could not update the computer’s boot configuration. Installation cannot proceed.”

Your computer’s boot configuration is what tells it how to start up your operating system.windows could not update the computers boot configuration. Windows Could Not Update The Computer's Boot Configuration Windows 10

If it’s not working properly, you may see error messages like the one above.

There are a few things that could be causing this problem, but fortunately there are also a few simple solutions. Let’s take a look at what might be going on and how to fix it.

Possible Causes

One of the most common causes of this error is an outdated BIOS. The BIOS is a piece of low-level software that helps your computer start up and is stored on a chip on your motherboard. Occasionally, manufacturers will release updates to the BIOS to add new features or fix bugs. If you’re seeing this error, it’s possible that your BIOS is out of date and needs to be updated.

Another common cause is a corrupt or missing BOOTMGR file. This is a crucial Windows file that’s responsible for booting up your operating system. If it’s damaged or missing, you may see the error message above.

Fortunately, there are a few easy ways to fix these problems.

Solution 1: Update Your BIOS

If you think your BIOS might be out of date, check with the manufacturer’s website to see if there are any updates available. Updating your BIOS is usually a pretty simple process and only takes a few minutes. However, it’s important to follow the instructions carefully to avoid damaging your computer.

If you’re not comfortable updating your BIOS on your own, you can always take your computer to a local computer store or give us a call and we’ll be happy to help.

Solution 2: Fix Your Boot Configuration

If your BOOTMGR file is missing or corrupt, you can use the Bootrec.exe tool to rebuild your boot configuration. This is a pretty advanced process, so we recommend taking your computer to a local repair shop or giving us a call if you’re not comfortable doing it yourself.

If you are comfortable proceeding, here’s what you need to do:

1. Insert your Windows installation disc and restart your computer.

2. Press any key when prompted to boot from the disc.

3. Select your language preferences and then click “Next.”

4. Click “Repair your computer.”

5. Click “Command Prompt.”

6. Type the following command and then press Enter:

bootrec /fixmbr

7. Type the following command and then press Enter:

bootrec /fixboot

8. Type the following command and then press Enter:

bootrec /scanos

9. Type the following command and then press Enter:

bootrec /rebuildbcd

10. Restart your computer.

Your computer should now be able to boot up properly without any errors. If you’re still seeing the same error message, or if these steps don’t work for you, give us a call and we’ll be happy to help.

How to FIX: Windows could not update Boot configuration in Windows 10 Setup.

Method 1. Disable Secure Boot in BIOS & Boot from Legacy USB.
Method 2. Create the Boot Configuration Files Manually.
Method 1. Disable Secure Boot in BIOS & Boot from Legacy USB.

1. Enter BIOS (CMOS) Setup settings. 2. Enable the Legacy support. 3. Change the Boot Mode from UEFI to Legacy (CSM). 4. Then Disable the Secure Boot in Security options. 5. Set as First boot device the Legacy Windows USB drive. 6. Save and exit from BIOS Setup. 7. Boot from the Legacy USB drive and continue to install Windows 10. *

* Note: If you cannot boot from the USB, then recreate the USB drive for a Legacy System (MBR Partition scheme). To do that:

a. If you haven’t done so already, download Windows to an ISO file by using the Media Creation Tool. b. Then, download and run the Rufus USB Creation Utility.

c. Plug an Empty USB Drive on your PC. (Keep in mind that all files on the USB will be deleted, during the creation process).

d. In Rufus utility, do the following:

1. Choose the empty USB stick that you plugged in your computer. 2. Click Select and choose the “Windows.iso” image file. 3. At Partition scheme, choose: MBR 4. At Target system, choose: BIOS (or UEFI-CSM) 5. At Volume label, you can enter any volume name for the USB disk (e.g. “Win10”) 6. At File system, choose: NTFS. 7. At Cluster size, leave the default size: 4096 bytes. 8. Finally click Start.

Windows 10 RUFUS USB MBR

Additional Help: If you want to change Legacy to UEFI after you install Windows 10, follow these instructions: How to Change Legacy to UEFI Without Reinstalling Windows 10

Method 2. Create the Boot Configuration Files Manually.

1. When you see the “Windows could not update the computer’s boot configuration. Installation cannot proceed” message, press the SHIFT + F10 keys to launch the command prompt.

2. In command prompt type the following command to list all the drives on your system:

  • wmic logicaldisk get name

wmic logicaldisk get name

3. Now, by using the “DIR <Drive_Letter>” command, examine the contents of all listed drives (except the drive X:), to find out which drive contains the “Windows” folder. (e.g. “dir C:”) *

  • dir C:

* Note: If the Windows directory is displayed then continue to the next step. otherwise continue by typing the next alphabet letter until you found which drive contains the Windows folder (e.g. dir d: , dir e:. dir f:, etc.).

(In this example the Windows folder is located at drive C: )

list directory command

4. Then open the DISKPART utility by typing the following command and press Enter:

  • diskpart

5. At DISKPART prompt type:

  • list disk

list disk command

6. Now type the following command and then press Enter:

  • select disk X

* Note: Where “X“= the number of the disk where you install the Operating System. (e.g. the disk 0 in this example).

select disk command

7. Then type the following command and press Enter.

  • list partition

8. Find out which Partition is labeled as System.

(In this screenshot the Partition 4 is labeled as System)

list partition command

9. Select the System partition by typing:

  • select partition X (Where “X “is the number of the partition labeled as System. e.g. “4”).

select partition command

10. Assign a drive letter (e.g. the letter “S“) to the System partition by typing the following command and press Enter: *

  • assign letter=S:

* Note: If the drive letter “S” is already used, then give the next drive letter in alphabet.

assign letter command

11. Type exit and press Enter to close DISKPART tool.

12. Then give the following commands in order (press Enter after typing each one of them).

    1. cd /d S:EFIMicrosoftBoot
    2. ren BCD naponewsonline.org
    3. bcdboot C:Windows /l en-us /s S: /f UEFI

Notes:

1. Change the letter “S” if you have assigned a different drive letter to the System partition.

2. If Windows is located on a different drive then use that drive letter instead of “C“.

3. The “/l en-us” part of the above command sets the Windows language to English. If you want to set a different language, then replace the “en-us” with the appropriate language code (e.g. “fr-FR” for France).

13. When the command is executed, press the Power button for 5-6 seconds to fully shutdown the PC. 14. Unplug the USB media. 15. Power ON the PC to finish the Windows 10 installation.

That’s it! Which method worked for you? Let me know if this guide has helped you by leaving your comment about your experience. Please like and share this guide to help others.

How to Fix Boot Configuration Data (BCD) File Missing Error in Windows 10/8.1/8?

If your Windows 10/8/8.1 can’t boot because of the “Boot Configuration Data (BCD) is missing” error, you can fix it with the following methods.

FAQs

How do I update my computer’s boot configuration?

If you’re having trouble updating your computer’s boot configuration, you can try using the Bootrec.exe tool. This tool is designed to help fix problems with your computer’s boot configuration data (BCD).

What is a boot configuration data file?

A boot configuration data (BCD) file is a critical component of your computer’s boot process. It stores information about the Windows operating system and the settings that are applied to it when it starts up. If this file becomes corrupted, it can cause your computer to malfunction or even fail to start up.

How do I create a new boot configuration data file?

If you need to create a new boot configuration data (BCD) file, you can use the Bootrec.exe tool. This tool is designed to help fix problems with your computer’s boot configuration data (BCD).

How do I repair a corrupted boot configuration data file?

If you have a corrupted boot configuration data (BCD) file, you can use the Bootrec.exe tool to repair it. This tool is designed to help fix problems with your computer’s boot configuration data (BCD).

What are some common causes of boot configuration data corruption?

There are several potential causes of boot configuration data (BCD) corruption, including:

• Accidental deletion or modification of critical files

• Viruses or malware infections

• Improper shutdowns or power surges

• Hard disk errors or bad sectors

• File system corruption

How can I prevent boot configuration data corruption?

There are several steps you can take to help prevent boot configuration data (BCD) corruption, including:

• Regularly back up your computer’s critical files

• Keep your antivirus software up to date and perform regular scans

• Be careful when making changes to your computer’s boot settings

• Make sure your computer is properly shutdown before unplugging it from power

• Check your computer’s hard drive for errors regularly

• Run a reliable file system checker tool (such as chkdsk) on your hard drive periodically

How do you fix the boot configuration data for your pc is missing or contains errors Windows 10?

If you are getting the error “boot configuration data for your pc is missing or contains errors”, it means that there is a problem with the boot files on your computer. This can be caused by a number of things, but most commonly, it is caused by a corrupt or missing boot file.

There are a few different ways that you can go about fixing this problem, but the most common and effective way is to use a tool called “Boot Repair”. Boot Repair is a free program that will scan your computer for any corrupt or missing boot files, and then replace them with fresh copies.

How do you fix bootmgr is missing in Windows 10 without CD?

If you are getting the “bootmgr is missing” error, it means that the boot files on your computer are corrupt or missing. This can be caused by a number of things, but most commonly, it is caused by a corrupt or missing boot file.

There are a few different ways that you can go about fixing this problem, but the most common and effective way is to use a tool called “Boot Repair”. Boot Repair is a free program that will scan your computer for any corrupt or missing boot files, and then replace them with fresh copies.

How do you fix Ntldr is missing in Windows 10 without CD?

If you are getting the “Ntldr is missing” error, it means that the boot files on your computer are corrupt or missing. This can be caused by a number of things, but most commonly, it is caused by a corrupt or missing boot file.

There are a few different ways that you can go about fixing this problem, but the most common and effective way is to use a tool called “Boot Repair”. Boot Repair is a free program that will scan your computer for any corrupt or missing boot files, and then replace them with fresh copies.

How do you fix the registry is corrupted in Windows 10?

If you are getting the “registry is corrupted” error, it means that there is a problem with the registry on your computer. This can be caused by a number of things, but most commonly, it is caused by a corrupt or missing registry file.

There are a few different ways that you can go about fixing this problem, but the most common and effective way is to use a tool called “Registry Repair”. Registry Repair is a free program that will scan your computer for any corrupt or missing registry files, and then replace them with fresh copies.

How do you fix bootrec /fixboot access is denied in Windows 10?

If you are getting the “bootrec /fixboot access is denied” error, it means that there is a problem with the boot files on your computer. This can be caused by a number of things, but most commonly, it is caused by a corrupt or missing boot file.

There are a few different ways that you can go about fixing this problem, but the most common and effective way is to use a tool called “Boot Repair”. Boot Repair is a free program that will scan your computer for any corrupt or missing boot files, and then replace them with fresh copies.

How do you fix bootrec /fixmbr access is denied in Windows 10?

If you are getting the “bootrec /fixmbr access is denied” error, it means that there is a problem with the boot files on your computer. This can be caused by a number of things, but most commonly, it is caused by a corrupt or missing boot file.

There are a few different ways that you can go about fixing this problem, but the most common and effective way is to use a tool called “Boot Repair”. Boot Repair is a free program that will scan your computer for any corrupt or missing boot files, and then replace them with fresh copies.

How do you fix the selected entry could not be loaded because the application is missing or corrupt in Windows 10?

If you are getting the “selected entry could not be loaded because the application is missing or corrupt” error, it means that there is a problem with the boot files on your computer. This can be caused by a number of things, but most commonly, it is caused by a corrupt or missing boot file.

Conclusion

After trying all of the steps listed, if you are still having issues with your computer not booting correctly, it is best to seek out professional help. A technician will be able to look at your specific situation and help get your computer up and running again. Thank you for reading our blog post on how to fix a computer that won’t boot. We hope you found this information helpful.

Read more:

Could not be saved because the source file could not be read

Tpm nv corrupted or tpm nv structure changedThe procedure entry point createdxgifactory2 could not be located in the

Keyboard Works In Bios But Not Windows ?

Also read: How To Close Crypto.com Account – Step by Step Guide